The HaloSense portable leak detector is ideal for measuring hydrogen peroxide gas concentrations before the room is cleared for re-entry and for locating possible leak sources. With a built-in sampling pump and inlet wand, samples can be drawn without exposing the operator or disturbing the room seal.

For spaces that are treated frequently and in environments with multiple separate rooms, the HaloPortal is a permanently installed disinfectant solution that offers great advantages in speed and repeatable efficacy. With the HaloFogger outside of the treatment room, a user can easily join a hose assembly to the HaloPortal and instantly connect to a wall-mounted nozzle assembly inside the room to deliver HaloMist™ Disinfectant. Once dispensing is completed, the detachable hose assembly is disconnected and the HaloFogger can be relocated to a new site without removing the sealed barrier or entering the room requiring full PPE.

Benefits

• Operation from outside the room allows rapid treatment cycles without entering the room.
• Set up time is minimized.
• Using a single HaloFogger to treat multiple rooms is more cost effective.

HaloShield reusable vent cover and smoke detector covers help make room preparation for fogging treatment faster and easier. Constructed from lightweight plastic and closed-cell foam, HaloShield installs quickly, effectively covering most standard sized ceiling ventilation and smoke detector locations. The ZipPole® extendable handle provides secure installation of the covers from the floor, with no ladder required. When you’re ready to re-occupy the room, simply lower the HaloShield, disconnect from the ZipPole and store for your next use.

The HaloSwtich™ is an integral component of the Halo Disinfection System that controls operation of the HaloFogger® and an air scrubber (dehumidifier, air handler, etc.). The HaloSwitch will start the scrubbing process automatically, greatly improving room turnaround time. Built with universal receptacles, the HaloSwitch is a dual voltage device that will work with either 120V/60Hz or 220V/50Hz and accept a wide variety of country specific power plugs.

Chemical Indicator strips are a simple, effective and reliable method for verifying coverage of the disinfecting mist dispensed by a HaloFogger®. Positioned throughout a room prior to treatment (a minimum of four is recommended, one in each corner of the room), the pad on the strip’s end will change from white to black in the presence of high levels of hydrogen peroxide (70ppm or higher). Position strips wherever you need for positive proof that the hydrogen peroxide disinfectant has reached—and disinfected—that surface.